Відео

@@lilfella8955 is your vehicle not under warranty?

@@unclemarksdiyauto no sir unfortunately

@@unclemarksdiyauto everything else works Juss doesn’t lock or unlock I can roll windows down and all that

@@davidbachy5627 Sorry it won’t. If you did hope that worked, it can’t suck the fluid fast enough. The engine will overheat and bye bye engine. It’s so easy to get an air pocket as well. Lots of fun but not impossible to do with the coolant funnel.

@@Chrisdee85 Humm. Signal bulb in a different spot?

@@miguelpidi1235 is your check engine light on when the car is running?

@unclemarksdiyauto yes it is a got a sensor issue I'm trying to fix.. could that be the reason?

@@k9under good to know. Many folks don’t know their is a filter and many don’t know the engine oils should be changed every 50 hours of run time.

@@Therollupstand_ Hard to tell from here. Can’t hurt though. I believe my problem is the timing chain cover gasket. Usually they run coolant through passages in there. Will have to check.

@@UninsuredCadillac The problem is engineers get points for building these vehicles faster. They get nothing for helping us repair them.

@@3613jeremy Thanks Jeremy.

@@StabilityMan that is a excellent question! I never use them, but that is something I didn’t think of. The van was for sale and I was trying to hide the ugly missing paint and blisters on the hoods edge. This hide them fine.

@@bosssause788 You’re welcome! I am amazed how many of these vehicles are still around! (Great cars) Let’s keep them running!

@@leopoldpoppenberger8692 did I miss speak? It was 300 videos ago.

@@kevinvega3334 They usually go missing, right?

@@kevinlillie130 You are too kind, Kevin. I do hope this can help others do this job. Move videos on this vehicle soon.

There should be a way to toggle between the clock and the radio frequency. I sold this car about 3 years ago, back in 2020, so I can’t remember how to do this.

@@the-uz1hq the washer?

It’s a Chrysler 300

@@JacobSmith-f1l what kind of vehicle? Also, that probably is a coincidence. Also, I would mention it to that mechanic.

@@unclemarksdiyauto a Chrysler 300 after he put the starter he said the original key wasn’t working so we programmed another and the buttons weren’t functioning from the key fob

@@unclemarksdiyauto I will try the thing in the video but do I need those small cables or can I just put them together for a few hours?

@@SolitaryWolf I just bought a region free 4k BluRay player. (Since I wanted to upgrade anyways. Now I can buy any region. Thanks for your idea though. I am sure many will appreciate your suggestion.

@@LewyMessy That’s what I was figuring g! Thanks for the info. At the time of replying to you, the new aftermarket lights now have some LEDs not working. Yes it’s been a few years, and wondering if the original Ford might have lasted longer. (Or another brand of aftermarket. That’s for stoping by, Lewy.

@@mcole442 I hear the non turbo ones are much easier to access.

@@serenaalvinandthechargeonq7117 Did this work and on what type of vehicle?

@@inquisitvem6723 Manitoba Canada. Poplar tree fuzz.

@@jesserowland6936 Maybe easier, but more dangerous. Start vehicle, and better have a good parking brake as you step out to put it into reverse, back in car, brake off, then move it out of driveway, parking brake back on, get out, open hood, put into drive, get back, brake off, and go. Plus you would have to disconnect the cable from the top of the transmission. Also, if on a bit of an incline, it maybe hard to get it out of park. I would suggest if you’re having issues with your shift, get it fixed ASAP.

DeOxit D5 contact spray: amzn.to/3pku5h4

@@he-cr6jv It should be as long as you done need a battery relearn after battery is disconnected. What are you driving?

@@unclemarksdiyauto I'm from PH and driving a Mitsubishi Xpander 2019

@@davidanthony8017 Your welcome, David. There are a few more videos on this vehicle in the repair playlist.

What are you driving? Year make & Model.

@@sorrowcat2724 Glad I posted it! I was stumped as to what was going on too! Lots more tips on my channel!

@@unclemarksdiyauto I thought I botched my cv axle replacement 😭 Sure thing man, I subscribed.

@@sorrowcat2724 I thought I did something wrong also! Glad post is helping out. What kind of vehicle are you driving?

@@BarryTsGarage thinking yep, 57/58?

@@user-dp8pv7nu7i 58 you mean? It was cool to see this driving around. Also interesting that years ago no one wanted these and now we are searching them out.

@@treshaunejimmerson4033 most ft lb torque wrenches start at 30-50 ft pounds. Even if they started at 10 ft lbs, I am not sure how accurate a cheap wrench would be.

I’m not exactly sure how to test the accuracy of the one I happen to have. It’s a Pittsburgh 5-80 ft lbs torque wrench. Do you think I should trust it??

@@treshaunejimmerson4033 Not sure what to say. If you have done the job already, it has to be more accurate than trying to hand tighten without this tool.

@@Rick_Kn Yes to the truck, just a little bit older though! Thanks for playing along, Rick

@@larrymohawk631 it may have been worth a shot! It was melted pretty bad. Not worth a chance on a break down later on for how cheap I was able to buy the replacement for. Thanks for stopping by, Larry.

@@ronaldwenrich8117 I do not know. It is worth a shot as long as your vehicle does not require battery reprogramming/relearning.

@@unclemarksdiyauto How would a person know if the battery needs reprogramming and relearning? Are you saying, DON'T connect the two battery cables together if it needs reprogramming which would require a dealer visit?

I forgot to give you the car info, 2014 Buick Encore.

Hope this got you home, or to a shop for repair. Don't let it go too long not fixed.

On 2023 f150 but got longtubes

Could be 02 sensor, could be corroded connector, broken wire, a exhaust leak near the sensor. Put a good brand name sensor back in, not some chinesium brand. They are trouble.

@@unclemarksdiyauto cleaned the 02 sensor good and cleared the code yesterday, today it never came back on , only the code for no cats but we will see if it comes back on later if it does then I’ll just replace the whole 02 the truck only has 30k miles

@@unclemarksdiyauto will motorcraft do the job still ? If I have to end up replacing it later on

@@Slow_f15023 Yea that seems low miles for a issue, but things break. How old is the vehicle?

You are too kind my friend! Hope the bulb change went easy.

@@joemcclelland65 And you are way too kind. Hope it went easy.

@@nievesbermudez7453 you and my wife are welcome!

@@miraclesmusic Yes, it can make it easier. I should this without a impact for the majority of folks who will watch but will have limited tools. Hope your repair goes well!

It is called a ESMI. Evaporative Emissions System Leak Detection Pump. Here is a amazon link: amzn.to/3R1RFcF Just make sure it fits you vehicle.

@@estiben3508 honestly I have no idea. Sorry my friend!

@@NineToes19 Long comment. Thanks. One thing I must mention about your comment about having everything dry before letting this run. This is outside. It gets wet! Actually it gets soaked. And if humidity is high or temp is hot in house, this unit turns on no matter if it’s raining outside or not. (Just a thought) Thanks for stopping by!

@@unclemarksdiyauto Agreed. I just wanted to make sure people doing this for the first few times were extra careful and safe.

@@NineToes19 Yes! Good suggestion for sure. Don't be rough, be gentle. These fins bend just by looking at them!

@@LakesideAutobody saying I made a good video means a lot, Jerry. Hope it helps people change this piece instead of postponing the swap.

@@SidneyHamm-x1d Not sure what the 2015 ECOBOOST sensors are like. Glad you are a thinking person and went with your gut and got it off without any problems. Stay safe and keep that truck running, Sidney. Thanks for your comment.